Showing posts with label failure. Show all posts
Showing posts with label failure. Show all posts

Tuesday, February 13, 2018

The Only Odd One is Me

Not to stir up any fears, but here we go. That in-the-moment feeling of everyone watching, while everyone else says they are not. Can we be real for a second? If you are not staring at a screen in a crowded place, how observant are you? Do you notice when someone does something, at least innocuous such as tripping on flat ground and then looks around to see if anyone saw? Yeah, sorry, I saw that one. Shall we just share a smile and keep going forward?


The problem is that there are so many non-innocuous situations that anything from dumb to malevolent. Going to this World Life Expectancy site can be a bit eye opening, plenty of malevolence, but plenty of stuff that I could classify as dumb, but really it is just sad. Not sad as in “those people should have seen it coming,” rather maybe it could have been prevented by better/earlier treatment or just better friends. Maybe in my age group the traffic accidents could be helped by smarter cars…


Anyway, there is a point to this: Whatever I am suffering that is not acute AND terminal, there are possibly a few thousand people suffering of the same thing. That is true of post-graduate online masters degrees. Of artfully procrastinating by practicing writing. Of making bad lists with weird sentences. Though that last might be just me at the moment. But there are people suffering, or...  Oh, how odd am I?


I am odd, there are so many things that I am bringing to the front of my mind through biases where I haven’t really met many people that do, or have done, a permutation of different things that I have. This is the deal with permutations, even if someone else has done everything I have, but flipped the order of two events, then by definition we are not the same, because we experienced those two events with different views. Twins can be a prime example.


You are odd as well. I have found out, somewhat too recently, that I have no idea what is going on inside your skull and trying to understand every nuance is impossible and/or maddening. I spend so much time with my wife, yet it is better to have a model than to be “sure” of what she is thinking.


What frustrates me more is how odd I feel in trying to make people understand my thoughts. I think my thoughts are pretty good, the problem lies where your thoughts conflict with mine. Either I am too dismissive because I am too absorbed by my thoughts, or I have already considered it thoroughly and have a ready answer. Though that seems dismissive too because I cannot explain it well enough.


Four years of theater should have made me a better actor, if not in hiding what I think, at least in having the poise to articulate it better. Well no, I get cut-off when I need a moment to speak, but then ramble when someone should just cut me off. Can I have it both ways? Thinking, listening, and responding. How might I even practice that? How can I even find the place to practice that?


I would love to tell stories too, but I would for now settle with schooling on conversation. I have to say that I write better than I did back in this post, the first, from twelve years ago. Even so, I can improve my writing. Better to practice than to pine about not having practiced. Only a recent addition, that, maybe it will stick.

No one is odd in that everyone is odd. Maybe I will find some more odd people that we can be mostly mutually accepting of one another.

Sunday, January 14, 2018

Start 2018, Review Some 2017

What’s more disappointing than failing to do well in a class? Working hard and then failing anyway, at the last irreparable moment.

I didn’t actually fail, but C’s are no longer average and certainly not in a program with thousands of computer science students. I would like to say that I am a more well-rounded individual because I did other things that led to me not putting enough time into this class. That is unfortunately not the case. I quit orchestra, said no in several cases where the church needed help with sound, stayed home from small groups, sequestered myself from visitors, and relied on my wife’s good graces to survive and stay in an up-kept house. Really there were only two main (good) things that I got from this experience:


I came up with an effective way, for me, to study for an open-note exam. The fact that I didn’t fail it outright means that I must have done something right. Essentially it breaks down into how to go back over the lectures and the slides looking and listening for key pieces, noting them, and then having some recollection of it. This review took place for the week leading up to the exam. I didn’t do great, but much better than the test that prompted me to drop this class last spring.


And, amazingly, I learned about a few things that I would have liked to have known going into the robot competition last year. Go figure. So unless they drastically change the Computer Vision Course I would suggest giving yourself between 10 to 30 hours a week in order to get things done.


Not being one to dwell on past failures, except where it is due, I am looking forward to the next class quite a bit: Education Technology. This class is much more free-form, reading, discussing, and a project/paper. There are no lectures, but it looks like it will need a bunch more reading.


It will be challenging, but I think that if I use the resources at the lab, papers and interview people, then I should be on a good path to have a good path/project for this class. In fact I am starting a project that is all about tech and education, a bird quiz!

As the year is winding down I have been thinking of how I can improve a bunch of my processes. It is pretty hard to think clearly about life and homework while in the midst of it, especially in the Dark Playground. But now with more time, some hindsight, and a few good ideas there should be some subtle ways to improve.


Fortunately my positive goals are somewhat easy to accomplish: exercise, practice cello, write. Are these New Year’s resolutions? Yes and no. At the heart they are resolutions, however, they aren’t quite so nebulous as just those three things strung together in a sentence.


Before the new year began we had nine guests out for Christmas: my folks, my wife’s folks, my brother and his wife, my wife’s brother and sister, and her great uncle. Only one person had to sleep on a cot, and he wasn’t too bothered by that. Of course one major thing had to fail for it to be complete: The pellet stove gave out and therefore wasn’t helping the boiler to heat the house. The boiler has no way to prioritize domestic water and so we had no hot water for showers. We are remedying that this year, but I am glad it wasn’t the fridge or toilets or something else. It was great having a house full of people. We won’t do it again next year, but it isn’t out of the realm of possibility for the future, especially when we finish the inside of the barn.


If all goes well 2018 will be the year that I graduate.


P.S. This year I learned about events, that is, remembering events is so much better than just buying a new thing. Avoiding the detailed discussion that I would love to have about that: I went to Brain Candy Live and paid the bunch extra to meet Adam Savage and Michael Stephens in person! It was totally cool, geek credentials are totally secure.

Also my wife took me to a Piano Guys concert in D.C.! It was awesome, if a bit loud. Both within weeks of each other. I am pretty happy with that, now just to write the next great American sci-fi novel, right? Okay, maybe I should focus on Homework.

Saturday, January 14, 2017

Manufacturing Coming to a Place Near You

It’s old news, 3d-printing, unless you just got a printer for Christmas.



The manufacturing hub newly assembled.
I have been following the advent of consumer 3D-printers for quite a while, and they’ve basically revolutionized how an individual (normal, not owning a fab-factory) can think about custom trinkets or replacement parts.


Other than the price why am I excited to get a 3D-printer? While watching them get better and cheaper, it really has to do with two things: Exposure to the tech at COS and a major failure almost exactly 10 years ago.


First a bit of panic about the fact that it has almost been 10 years since the end of my undergrad degree. I guess I am celebrating by taking two graduate courses: Computer Vision and DB systems… Ten years later. It brings up some interesting memories of how bad a student I was, and how my senior project suffered because I had no clue what I was doing. I needed to design a circuit board, get parts manufactured, and write a program that would all be part of a telescope system. Much too much work for one person period, and I was a mess as a human.


I could not stay awake and I was afraid of failing with my project, therefore I did nothing. I think the first part was either just being dumb with sleep patterns or a real chemical imbalance that extended a few years into my first job. My money's on bad sleep patterns, I’ve now found that 7-8 hours really helps me stay awake during meetings, rather than field stripping and reassembling pens just to stay awake. The second part has slowly been remedied, mostly through COS as I explain in an earlier post.


There was also a revolution that started quietly just as I was finishing school: DIY. After I left the project in shambles and had been working there was a proliferation of things like Arduino and other premade programmable circuit boards (I designed a terrible circuit board that wouldn’t have done a tenth of what Arduino can.) Exactly what I needed to design for my project, but prepackaged. And then 3D-printers, I could have iterated on designs for the hardware, not worrying (too much) about getting it right the first time.


My failure was all my fault, but maybe it would have been worse if I had fewer excuses, or I wouldn’t have been as frozen in indecision.


Either way I watched 3D tech getting cheaper and cheaper, and I really wanted to jump on the boat. When it was less than $1k I thought that it would be good, but still other things like life were in the way. Then I started at COS and Brian had his printer at work. I thought about asking to work on it for a long time, especially when another employee was printing quite a few things. I still know that I have a slight starting problem (Slight, ha) but I finally asked for a quick tutorial and started printing. Now I know what to expect and have an inkling of troubleshooting.

There were failures, but overall I am hooked. Now I’ll need to post follow-ups as I print pieces, once I get this thing properly calibrated.

Featured Post

Allergy

John studied himself in the mirror as best he could through tears. Red, puffy eyes stared back at him, a running nose already leaked just a ...